Influence of air-gap shape of the tubular solenoid on dynamic pulling characteristic

Authors

  • Irina A. Bolshenko Platov South-Russian State Polytechnic University (NPI)
  • Anna G. Martirosyan Platov South-Russian State Polytechnic University (NPI)
  • Denis V. Batischev Platov South-Russian State Polytechnic University (NPI)
  • Valery V. Grechikhin Platov South-Russian State Polytechnic University (NPI)

DOI:

https://doi.org/10.17213/0136-3360-2024-1-56-62

Keywords:

electromagnetic solenoid, air-gap shape, dynamic pulling characteristics, ferromagnetic shunt

Abstract

The article presents the evaluation results of the air gap shape influence of the tubular solenoid on its dynamic traction characteristics. A review of technical literature related to the research of electromagnets with ferromagnetic shunts has been carried out.  The relevancy of developing electromagnetic solenoid with regulated dynamic pulling characteristics is being shown. Investigations of the dynamic pulling characteristics of the tubular solenoid with various forms of air gap shape using the FEMM and Open Modelica software packages have been carried out. Conclusions drawn on the basis of the obtained characteristics about the influence of the air gap shape of the tubular solenoid on its pulling dynamic characteristic can help in selecting the shape and size of the ferromagnetic shunt corresponding to the purpose and counteracting forces of the electromagnetic mechanism.

Author Biographies

Irina A. Bolshenko, Platov South-Russian State Polytechnic University (NPI)

Cand. Sci. (Eng), Associate Professor, Department «Electromechanics and Electrical Apparatus»,
Platov South-Russian State Polytechnic University (NPI)

Anna G. Martirosyan, Platov South-Russian State Polytechnic University (NPI)

Undergraduate student, Department «Electromechanics and Electrical Apparatus», Platov South-Russian State Polytechnic University (NPI)

Denis V. Batischev, Platov South-Russian State Polytechnic University (NPI)

Cand. Sci. (Eng), Associate Professor, Department «Electromechanics and Electrical Apparatus»,
Platov South-Russian State Polytechnic University (NPI)

Valery V. Grechikhin, Platov South-Russian State Polytechnic University (NPI)

Dr. Sci. (Eng.), Associate Professor, Professor of the Department of Information and Measurement Systems and Technologies, Platov South-Russian State Polytechnic University (NPI)

References

Любчик М.А. Оптимальное проектирование силовых электромагнитных механизмов. М.: Энергия, 1974. 392 с.

Kallenbach E., Eick R., Quendt P., Ströhla T., Feindt K., Kallenbach M. Elektromagnete: Grundlagen, Berechnung, Entwurf und Anwendung. 3. Auflage. 402 p.

Казаков Л.А. Электромагнитные устройства радиоэлектронной аппаратуры. М.: Сов. радио, 1978. 168 с.

Щучинский С.Х. Клапаны с электромагнитным приводом: Справочное пособие. М.: Энергоатомиздат, 1988. 152 с.

Исследование влияния ферромагнитного шунта на характеристики электромагнитного привода низковольтного контактора / А.С. Крамаров, Д.В. Батищев, И.А. Большенко, А.А. Гуммель // Изв. вузов. Электромеханика. 2021. Т. 64. № 2. С. 44-49. DOI:10.17213/0136-3360-2021-2-44-49.

Байда Е.И, Чепелюк А.А. Расчет электромагнитных систем с поперечным движением якоря и ферромагнитными шун-тами в рабочих зазорах // Eлектротехнiка i Eлектромаханiка. 2003. № 3.

Свинцов Г.П., Руссова Н.В. Моделирование статических электромагнитных характеристик Ш-образного электромагни-та с цилиндрическим сердечником и магнитным шунтом на скобе магнитопровода // Вестник Чувашского университета. 2004. № 2.

David Meeker. User's Manual. Finite Element Method Magnetics. Version4.2/DavidMeeker//source: http://www.femm.info/ Archives/doc/manual42.pdf.

OpenModelica User’s Guide. Source: OpenModelicaUsersGuide/OpenModelicaUsersGuide-latest.pdf.

Published

2024-03-27

How to Cite

(1)
Bolshenko, I. A.; Martirosyan, A. G.; Batischev, D. V.; Grechikhin, V. V. Influence of Air-Gap Shape of the Tubular Solenoid on Dynamic Pulling Characteristic. electromeh 2024, 67, 56-62.

Issue

Section

Articles